HP J9086A – HP 2610-24-PPOE Switch

Hewlett Packard Enterprise ProCurve 2610-24/12PWR Switch. Switch type: Managed, Switch layer: L2. Basic switching RJ-45 Ethernet ports quantity: 26. Full duplex. MAC address table: 8000 entries, Switching capacity: 12.8 Gbit/s. Networking standards: IEEE 802.1p,IEEE 802.1Q,IEEE 802.3,IEEE 802.3ab,IEEE 802.3u. Power over Ethernet (PoE)E2610-24-PPoEThe HP E2610-24-PPoE Switch is a managed stackable switch with 24 autosensing 10/100 ports, 12 of which are capable of PoE and 2 10/100/1000BASET and 2 miniGBIC ports.The HP E2610 Switch Series consists of five switches. The HP E2610-24 and E2610-48 provide 24 and 48 ports of 10/100 connectivity. The HP E2610-24 is fanless switch with quiet operation, making it ideal for deployment in open spaces. The HP E2610-24-PPoE, E2610-24-PoE, and E2610-48-PoE are IEEE 802.3af-compliant for Power over Ethernet (PoE) and provide up to 15.4 W for 12, 24, and 48 ports. The E2610-24-PPoE switch has 24 10/100 ports and provides 12 ports of PoE. All HP E2610 Switch Series include two 10/100/1000Base-T ports and two mini-GBIC slots for Gigabit uplink connectivity. An optional redundant external power supply is also available to provide redundancy in the event of a power supply failure. With static routing, robust security and management features, free lifetime warranty, and free software updates, the HP E2610 Switch Series is a cost-effective solution for customers who are building converged enterprise edge networks.- IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras. Pre-standard PoE support: detects and provides power to pre-standard PoE devices; see list of supported devices in the product FAQ at www.hp.com/networking/support. Gigabit uplink connectivity: two 10/100/1000BASE-T ports and two mini-GBIC ports for connectivity such as Gigabit (SX, LX, LH, 1000Base-T) and 100Base-FX. Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 ports;- IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking: support up to 24 trunks, each with up to 8 links (ports) per trunk. IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w. Optional redundant power supply: provides uninterrupted power (provided by HP E600 RPS/EPS);- RMON, XRMON, and sFlow: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events. Uni-Directional Link Detection (UDLD): monitors a link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the two devices. Command authorization: leverages RADIUS to link a custom list of CLI commands to individual network administrator’s login; also provides an audit trail. Multiple configuration files: allow multiple configuration files to be stored to flash image. Dual flash images: provides independent primary.- VLAN support and tagging: support the IEEE 802.1Q (4094 VLAN IDs) and 256 VLANs simultaneously. GARP VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs. IEEE 802.1v protocol VLANs: isolate select non-IPv4 protocols automatically into their own VLANs.